Plastic Crates
For Sale

64x48 containers

64x48 containers are extended-length bulk boxes about 64.5 x 48 in (1638 x 1219 mm), which ORBIS sells as its 65x48 BulkPak 6548 and buyers often call 64x48. They carry long, heavy automotive parts at up to 2,000 lb, in collapsible heights from 25.6 to 50.7 in and a 19.7 in fixed-wall model.

Get a quote Selling some?

Drawing of a collapsible bulk container standing beside the same model folded flat on its base
64"48"64x48 footprint
64.5 x 48 in · 1638 x 1219 mm
Measured
64.5 x 48 in (1638 x 1219 mm)
Sold as
64x48, 64.5x48 or 65x48
Rated load
Up to 2,000 lb (ORBIS)
Heights listed
19.7 to 50.7 in

One box, three names

Call it 64, 64.5 or 65: buyers use all three for the same box. ORBIS files it under 65x48 in its catalog and lists every model at 64.5 x 48 in. Plants and sellers round it either way, so the only safe check is a tape measure on the deck: 64.5 in long, 48 in wide. When an offer gives only a nominal size, ask for the measured deck and the maker's name molded into the wall before comparing it with anything else.

The name to watch is 62x48. ORBIS also builds a 62.5 x 48.3 in HD6248 series, rated up to 1,500 lb, in 25, 34 and 50 in heights. It is 2 in shorter, a different mold, and should not be expected to interstack with a 64.5 in box. If a used offer says 62, it is not this size.

Heights and models

We read no collapsed heights, tares or trailer counts for 6548 models, so those come from the maker's sheet when we quote a specific box.

ORBIS listings; capacity per the ORBIS series page
Maker or sourceModelOutside L x W x H (in)StyleNotes
ORBISHDRS6548-1964.5 x 48 x 19.7Fixed wallLowest ORBIS height
ORBISHDR6548-2564.5 x 48 x 25.6CollapsibleUp to 2,000 lb for the series
ORBISHDR6548-3464.5 x 48 x 34.7Collapsible-
ORBISHDR6548-4264.5 x 48 x 42.7Collapsible-
ORBISHDR6548-5064.5 x 48 x 50.7CollapsibleTallest listed
ORBIS (different size)HD6248-25, -34, -5062.5 x 48.3 x 25 to 50CollapsibleUp to 1,500 lb; not interchangeable

Rows per trailer, worked out

Here is the floor math, ours rather than a maker's. A 53-foot trailer is about 630 in long inside. Divide by 64.5 and you get 9.77, so nine rows lengthwise with about 50 in left over, room for a short row of something else turned crosswise. At two across that is 18 floor positions, against 26 for a 48x45 and 22 for a 56x48.

Fewer positions, but each carries more part length, so the comparison that matters is parts per trailer. Tell us what goes in and we work it both ways. How high they stack depends on the height you pick and on the maker's dynamic rating, which we confirm per model. See trailer fill.

Choosing a height for a long box

Start from the part, then check the building. A 19.7 in fixed-wall box keeps heavy pieces low and easy to reach over the rim. A 50.7 in collapsible holds far more, but puts the bottom layer beyond arm's reach, which is why tall boxes so often carry drop doors.

Before going tall, measure what the box must clear: forklift lift height with a loaded box on the forks, dock door openings, sprinkler heads above storage rows, and beam spacing in any rack. A stack that works in the yard can still be one tier too tall indoors. Extra length also changes balance on the forks; a 64.5 in box can overhang common fork lengths, so ask your drivers whether they need longer tines or extensions.

Types built at this length, and who runs them

Mostly collapsible bulk containers, the HDR6548 range. The low fixed-wall HDRS6548-19 is a rigid bulk bin; ORBIS says of its fixed-wall styles on the 48x45 line that they support heavy, dense components, and the same logic holds for a long, low box with no hinges to give. Long boxes often need inserts, so plan the dunnage with the box.

Covers are a separate question. ORBIS sells a detached CHDR cover for its 48x45 boxes; ask us whether a matching lid exists for the 6548 before you plan a lidded, weatherproof stack outdoors.

ORBIS describes the 6548 as designed for lengthy, hard-to-fit parts common in the automotive industry, and for automotive and industrial applications generally. That means vehicle assembly and its suppliers first, then heavy manufacturing wherever a part outgrows a 56x48. If the part is longer again, the 70x48 is the next step.

Used and refurbished 64x48

Ask about refurbished as well as used. In a long box, replacing a cracked door or one wall can return a unit to service, so refurbished lots are worth a look here. Refurbished usually means parts were replaced, such as doors, latches or a wall, so ask which, and whether replacements match the original maker. Our refurbished page explains how we describe that work.

A mixed-color lot can mean mixed origins. Two boxes the same size from different molds may not lock together in a stack, so we check models before mixing them in one order. Grades A, B and C apply as on any lot; the grades guide has the detail.

What we need to quote

  • The part: longest dimension, weight, and how many per box.
  • Height: 19.7 in fixed wall up to 50.7 in collapsible.
  • Doors: none, or how many and on which faces.
  • Whether the order must match boxes you already run, and their maker and height.
  • Any ID plates, barcodes, hot stamps or RFID tags your plant tracks boxes with.
  • New, used or refurbished; count; delivery ZIP. Then the quote form.

Questions

Is a 65x48 bulk container the same as a 64x48?

Usually yes. ORBIS sells its 6548 series as 65x48 but measures it at 64.5 x 48 in, and many buyers call the same footprint 64x48.

Is a 62x48 container the same size?

No. ORBIS's HD6248 is 62.5 x 48.3 in, 2 in shorter, rated up to 1,500 lb, and built as a separate series.

How many 64x48 boxes fit in a 53-foot trailer?

By floor length, about nine rows of two, or 18 positions, since 630 in divided by 64.5 in is 9.77. The stacked count depends on height and the maker's rating.

Can one order mix 25 in and 34 in boxes?

Often, yes. Heights within one maker's series share the same deck outline, so a split order is simple to build; we confirm with that maker how a mixed-height stack is rated before anyone loads it that way.

Do 64x48 containers fold flat?

The ORBIS HDR6548 models are collapsible; the HDRS6548-19 has fixed walls and returns at full height. We take each model's folded height from the ORBIS sheet when we quote freight.

Sources

Figures on this page come from these pages, last reviewed 2026-11-08. Makers update their sheets; confirm a model's figures on its current sheet before you order.

  1. ORBIS 65x48 bulk containers
  2. ORBIS 62x48 bulk containers
  3. ORBIS HDRS4845-21 (fixed-wall styles for heavy, dense components)
  4. ORBIS CHDR4845 cover

Ask for a quote

Say what you load, the footprint and how many. We match the container and reply by email with a quote and freight.

  • New, used or refurbished
  • Pallet loads to full trailers
  • No account, one form

Prefer email? info@plasticcratesforsale.com

Delivery address

We use these details only to answer this request. Email or phone: at least one.

Get a quote